Installation; Owner's Responsibilities - Blodgett COS-6 Installation And Operation Manual

Installation responsibilities prior to service
startup inspection
You are entitled to a free start-up inspection ser-
vice by our factory ASAP . Before a factory repre-
sentative arrives to perform a startup procedure,
the owner must already have satisfied the follow-
ing requirements.
1. Oven(s) are uncrated, stacked (if applies) and
put in place.
NOTE: Please refer to Leg Attachment and
Stacking.
Water
Water Pressure
Water Connection
Water Regulator Setting
Drainage
Drain Connection
Avg Water Drain Temp.
Model KW/Section
COS-6 9.5
COS-101 18.5
COS-101S 18.5
COS-8E 18.5
COS-20E 61
PLUMBING
ELECTRICAL
Voltage Phase
400/230 3
400/230 3
400/230 3
400/230 3
400/230 3
5

Installation

Owner's Responsibilities

MAXIMUM SHELF LOADING
COS-6
COS-101
COS-101S
COS-8E
COS-20E
276 kPa (40 PSI) minimum
345 kPa (50 PSI) maximum
19mm (3/4") Hose Cold Water
241 kPa static
Atmospheric Vented Drain
50.8mm (2.00") Copper
Approximately 50 (122_F)
Max Load (amps)
Frequency
(Hz) (H )
L1
50 14
50 26
50 26
50 26
50 88
22,7 Kg (50 lbs)
22,7 Kg (50 lbs)
45,5 Kg (100 lbs)
45,5 Kg (100 lbs)
45,5 Kg (100 lbs)
L2 L3
14 14
26 26
26 26
26 26
88 88