Using Call Waiting; Using The Phonebook - Uniden DECT 2145 Series Owner's Manual

using Call waiting

If you get a Call Waiting call, the phone can sound a tone and display any
CID information received for the waiting call.
For Australia:
Press TALK/FLASH and then press 2 to accept the waiting call. The first
caller is put on hold, and you will hear the new caller after a short pause.
To return to the original caller, press TALK/FLASH and then 2 again.
For New Zealand:
Press TALK/FLASH to accept the waiting call. The first caller is put on
hold, and you will hear the new caller after a short pause. To return to the
original caller, press TALK/FLASH again.

using the phonebook

The phone can store up to 100 entries in its phonebook. All handsets share
the same phonebook, so only one handset can access it at a time.
To...
open/close the phonebook
scroll through the entries
jump to entries that start with a
certain letter
dial the current entry
edit the current entry
delete the current entry
make a speed dial call
(base only)
Press...
PHONEBOOK.
to scroll through the entries
dOWN
from A to Z.
to scroll from Z to A.
UP
the number key corresponding to the
letter you want.
TALK/FLASH or SPEAKER
MENU/SELECT, then select Edit
MENU/SELECT, then select Delete.
When the phone prompts you to
confirm, select Yes.
Press and hold the speed dial number
(0 - 9) on the base for 1.5 seconds.
The speed dial entry displays. Press
Base SPEAKER key or lift the corded
handset to dial the number.
17