Find Handset; Flash And Call Waiting - Uniden WDECT 2300 Quick Start Manual

UP349BH (WDECT2300) ENG OM
If the battery pack is
completely drained,
the handset will not
beep when paging.
[ 26 ]
1/5/05 1:18 PM Page 26

FIND HANDSET

To locate the handset, press
when the base is in standby mode. All registered handsets
beeps for 60 seconds, and "Paging" appears on the
handset display. To cancel paging, press any key on the
handset or on the base.

FLASH AND CALL WAITING

If you have Call Waiting service and a call waiting tone
sounds during a call:
AUSTRALIA:
Press , then 2 to switch between callers.
NEW ZEALAND:
Press to switch between callers.
on the base