Programming With Simpl Windows - Crestron Isys TPS-6 Operation Manual

Crestron TPS-6
Configuration Manager
Operations Guide – DOC. 6945A

Programming with SIMPL Windows

NOTE: While SIMPL Windows can be used to program the TPS-6, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron's premier software for programming Crestron control
systems. It is organized into two separate but equally important "Managers".
Configuration Manager is the view where programmers "build" a Crestron control
system by selecting hardware from the Device Library.
1. The TPS-6 must first be incorporated into the system.
a. To incorporate the TPS-6 (Cresnet) into the system, drag the
TPS-6 from the Touchpanels | Touchpanels (Cresnet) folder of the
Device Library and drop it in the System Views.
Locating the TPS-6 (Cresnet) in the Device Library
b. To incorporate the TPS-6 (Ethernet) into the system, drag the
TPS-6 from the Touchpanels | Touchpanels (Ethernet) folder of the
Device Library and drop it in the System Views.
Locating the TPS-6 (Ethernet) in the Device Library
2. The system tree of the control system displays the device in the appropriate
slot(s) with a default Net ID, or IP ID as shown in the following illustration.
Isys™ 5.7" Tilt Touchpanel
Isys™ 5.7" Tilt Touchpanel: TPS-6 • 31