Crestron Isys TPS-6 Operation Manual page 13

Crestron TPS-6
Operations Guide – DOC. 6945A
TPS-6 (Front View)
4
5
4
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
1 SLEEP
2 BRIGHTNESS
3 POWER LED
4 HARD KEYS
5 UP/DOWN
6 THUMBPAD
* Text engraving on the TPS-6-W-S white model is not backlit.
Isys™ 5.7" Tilt Touchpanel
3
DESCRIPTION
(1) Programmable top-mounted pushbutton
(left "trigger" key), initiates Sleep mode, also
resets touchpanel if held for five seconds,
starting up at first page of the installed
project
(1) Programmable top-mounted pushbutton
(right "trigger" key), normally sets display
brightness level. Toggles between high,
medium, low and standby. Toggling can be
enabled/disabled from setup menu (refer to
"BACKLIGHT" which starts on page 24 for
details)
(1) Green LED, indicates DC power supplied
from Cresnet network or 24 volt DC power
supply
(8) Optional programmable pushbuttons;
engravable backlit* text (sold separately);
default engraving included
(2) Optional programmable "up/down"
pushbuttons, backlit, engravable backlit* text
on bezel (sold separately); default engraving
included
(5) Optional programmable pushbuttons for
4-way directional navigation and "enter",
backlit
Isys™ 5.7" Tilt Touchpanel: TPS-6 • 9
4
6
4