Fujitsu Plasmavision P42HTS40G User Manual page 8

PART NAMES AND FUNCTIONS (Continued)
AV SELECTOR SECTION – REAR
 Audio input terminals
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with the remote control. (See P. E-29.)
 Audio output terminals
For use when the audio from an audio system (amplifier) is used.
 Video1 input terminal
 Video2 input terminal
 Video4 input terminal
Connect this terminal to the SCART terminal of your VCR or DVD, etc.
* See "SETTING THE INPUT TERMINALS" on P. E-40.
 Video5 input terminal
 Video6 input terminal
Connect this terminal to the component video output terminal of your DVD, etc.
 Video7 input terminal
Connect this terminal to the HDMI output terminal of your DVD, etc.
 RGB1 input terminal
Connect this terminal to the monitor (DVI-D) output terminal of your PC.
 RGB2 input terminal
Connect this terminal to the monitor (mD-sub) output terminal of your PC.
 Display output terminals (Picture/Audio)
Connect these terminals to the picture input terminal and audio input terminals on the display.
 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-14.)
 Antenna input terminal
Please connect it to the antenna signal.
E-8