C
O
M
M
E
R
C
The C932i Keypad
The C932i keypad allows a user to control the workout session. Information that
you will find in this section includes:
•
Tips on using the display keypad
•
Descriptions of each key on the keypad
•
How to use the SELECT key to change which features appear on the display
KEYPAD TIPS
Review the following tips and make sure that your customer's know how to use
the keypad.
•
Accurate entries are required or features such as SmartRate
properly.
•
During the Setup prompts, a user can change the information being dis-
played by pressing any ▼ or ▲ key. (Incline and speed levels are not af-
fected until the program begins.)
•
Press SELECT to "select" the information being displayed.
•
Pressing QUICKSTART at the PRECOR banner bypasses further selec-
tions and displays the Manual (MANL) program. Default values apply. The
SmartRate
QUICKSTART
•
Anytime during the setup or workout, press RESET to return to the PRECOR
banner.
•
A time-out occurs during the Setup prompts if the C932i detects no key
presses for two minutes. The display returns to the PRECOR banner.
SPECIAL KEYPAD FUNCTIONS AT THE PRECOR BANNER
A variety of tasks can be performed from the banner using different key presses:
Note: Key presses to the ▼ or ▲ key are ignored when the banner is being displayed.
RESET — initiates the diagnostic mode. Refer to Club Information on page 21.
QUICKSTART
fault settings apply. Refer to The Setup Mode and the QUICKSTART Feature on
page 29.
SELECT — initiates the Setup mode and causes the program prompt to appear.
page 32
I
A
L
P
R
O
D
®
display will not appear. Refer to The Setup Mode and the
TM
Feature on page 29.
— causes the system to start the Manual (MANL) program. De-
TM
U
C
T
S
D
I
V
I
S
I
O
N
®
will not work