Table of Contents
Advertisement
C
O
M
M
E
R
C
Press SELECT once again and the Error Log appears. The most recent error log
appears first and scrolls across the display. If the words, NO ERRORS appear, no
errors have been recorded.
Up to ten error codes can be recorded and viewed in the following format.
Most recent error
1: ER33 AT 12,345,678 MILES 1,714 HOURS
Error code
Note: To clear (delete) the error log, press the QUICKSTART key for at least four
seconds while the message HOLD QUICKSTART TO CLEAR ERROR LOG scrolls
across the display. If the QUICKSTART key is released before the message finishes
scrolling, then the display returns to the previous error code. If you continue to press the
QUICKSTART key until the message finishes scrolling, then prompts appear on the
display and let you know when the error messages have been deleted from memory.
Important: You cannot retrieve the error log once you have deleted it.
To view the serial number, press SELECT. Write the serial number onto the warranty
registration form on page 54 and in the space provided on page 7. The serial number
is helpful should you ever need to contact Customer Support.
To return to the Precor banner, press RESET or the red STOP button.
page 26
I
A
L
P
R
O
D
The number of hours that the treadmill has been
in use when the error occurred
Odometer reading at the time the error occurred
U
C
T
S
D
I
V
I
S
I
O
N
Advertisement
Table of Contents
