Download Print this page

Vitek MEG SERIES Quick Manual page 3

4 channel digital video recorder

Advertisement

D. Storage
(1) Furnish automated disk management up to fourteen (14) terabytes of digital storage.
(2) Furnish disk mirroring redundant array recording.
E. Display
(1) Permit direct camera selection for recording and playback of any of four (4) video sources
at the same time as multiple screen viewing and multiplexed camera encoding.
(2) Built-in programmable sequence with dwell time up to ten (10) minutes.
(3) Multiple video outputs, in RGB, DVI and HDMI.
(4) Display mode of one (1) and four (4).
(5) Nine (9) times digital magnification feature shall be included with the digital video recorder
in both live and playback.
(6) The channel title shall have up to no limit on the number of alphanumeric characters.
(7) Each channel shall display camera number, location and time stamp and shall include
adjustable font color.
(8) Record status indicator and other OSDs shall include custom locations.
(9) The languages displayed shall be English and Korean.
F. Control
(1) Camera functions and control shall be accessible for four (4) cameras with an included
USB two-point-zero (2.0) mouse.
(2) Access all camera control, set-up, alarm functions, motion detection, including preset and
sequence.
(3) Controllable camera functions shall be accessible from via Internet Explorer plug-in client,
Central Management Software.
(4) These functions shall include direct access to preset positions, zoom, focus, tilt and pan.
(5) The DVR shall have no limit on the number of users.
(6) The users shall have custom level of access on Record, Search, Setup, Backup, Live
Video Control, PTZ Control, Video Export and Connected Client Management.
G. Inputs
(1) Furnish four (4) inputs of video connection via BNC female connections.
(2) The video input shall be High Definition Serial Digital Interface using VESA standards.
(3) Furnish four (4) inputs of audio connection via RCA female connections.
(4) Furnish four (4) inputs of Normally Open or Normally Closed sensor connections via
terminal blocks.
(5) Furnish ten (10) Universal Serial Bus two-point-zero (2.0) Ports for Human Interface
Device (HID) mouse and Human Interface Device (HID) Keyboard.
(6) Furnish two (2) Universal Serial Bus 3.0 Ports for Human Interface Device (HID) mouse
and Human Interface Device (HID) Keyboard.
(7) Furnish one (1) RJ-45 connection for network
(8) Furnish one (1) one-eighth of an inch (1/8") TRS connector for microphone.
(9) Furnish one (1) one-eighth of an inch (1/8") TRS connector for line-in.
H. Outputs
(1) Furnish four (4) outputs for relay connections via terminal block.
(2) Furnish ten (10) Universal Serial Bus (USB) two-point-zero (2.0) Ports for external storage
and copy connection.
Vitek Industrial Products, Inc. Specifications
February 2011
Vitek Industrial Video Products, Inc.
28492 Constellation Road
Valencia, CA 91355
Phone: 661-294-8043
Fax: 661-294-8044
e-mail: sales@vitekcctv.com
3 of 5 

Advertisement

loading