Adf Scanner Assembly Removal - Lexmark X264dn Service Manual

ADF scanner assembly removal

1.
Remove the rear door and cover. See
2.
Remove the front scanner cover. See
3.
Remove the right side scanner cover. See
4.
Remove the right side printer cover. See
5.
Remove the left side scanner cover. See
6.
Remove the left side printer cover. See
7.
Disconnect the operator panel cable at J14, the flatbed motor cable at JFBM1, the home sensor cable at
J1, the CCD ribbon cable at J2, and the USB cable at J20 from the controller board.
8.
Remove the ground screw (A), and disconnect the ADF cable.
9.
Remove the two screws (B) from the right side of the scanner tub frame assembly.
"Rear door and cover removal" on page
"Front scanner cover removal" on page
"Right side scanner cover removal" on page
"Right side printer cover removal" on page
"Left side scanner cover removal" on page
"Left side printer cover removal" on page
A
B
7013-XXX
4-69.
4-29.
4-75.
4-73.
4-35.
4-33.
4-9
Repair information