Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Control Options
Set the STRIKE P38 starting address in the 001–512 DMX range. This enables control of up to 85
products in the 6-channel 6 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Main Level
Programming Levels
DMX Address
Address
DMX
Personality
Dimmer
Static
Strobe
Auto Show
Auto 1–3
Red Shift
Master/Slave
Mode
Dimmer Mode
LED
Frequency
Back Light
Key Lock
STRIKE P38 User Manual Rev. 1
Description
Selects DMX address (highest channel restricted to
<001–510>
personality chosen)
3 Ch
3-channel: dimmer, red shift, dimmer speed
4 Ch
4-channel: 16-bit dimmer, red shift, dimmer speed
5 Ch
5-channel: dimmer, red shift, strobe, auto, dimmer speed
6-channel: 16-bit dimmer, red shift, strobe, auto, dimmer
6 Ch
speed
Controls intensity
<0–255>
Controls strobe rate
<001–100>
Automatic programs
On
Turns on or off Red Shift (Amber LEDs imitate lamp
when dimming)
Off
Master
DMX mode (Master)
Slave
Slave mode
Off
Linear dimmer
Dimmer 1–3
Dimming curves Dimmer 1 (fast) to Dimmer 3 (slow)
600Hz
1200Hz
2000Hz
Sets the PWM frequency
4000Hz
6000Hz
25KHz
On
Display backlight always on
10S
Turns off display backlight after 10 seconds of inactivity
20S
Turns off display backlight after 20 seconds of inactivity
30S
Turns off display backlight after 30 seconds of inactivity
On
Locks display (password is <UP>, <DOWN>, <UP>,
<DOWN>, <ENTER>)
Off
Page 7 of 16
Advertisement
Table of Contents
