Product Overview - Cisco WAE-INLN-4CG Series Manual

Product Overview

Warning
Product Overview
Note
Inline Network Adapter Description
Installing the Cisco WAE Inline Network Adapter
2
Get user manuals: See SafeManuals.com
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This section contains the following topics:
Inline Network Adapter Description
•
Ports and LED Indicators
•
• Adapter Specifications
The minimum software release required for the inline network adapter is WAAS 4.0.7.
WAAS software versions prior to 4.2.1 support one optional 4-port Ethernet inline network adapter on
WAE-7341/WAE-7371/WAE-674 appliances. Up to two inline network adapters are supported using
WAAS software version 4.2.1 or later.
The inline network adapter is a full-height, three-quarter-length PCI-X network interface card that
contains four independent Gigabit Ethernet ports. (See
Figure 1 Inline Network Adapter
Figure 1.)
OL-12480-03