Cisco ATA 187 Administration Manual page 35

Chapter 4 Configuring the ATA 187
Table 4-1 Telephony Features for the ATA 187 (continued)
Feature Description
Direct transfer Allows users to connect two calls to each other (without
remaining on the line).
Forced authorization Controls the types of calls that certain users can place.
codes (FAC)
Note
Group call pickup Allows a user to answer a call that is ringing on a directory
number in another group.
Hold/Resume Allows the user to move a connected call between an active
state and a held state.
Note
Meet–Me Allows a user to host a Meet-Me conference in which other
conference participants call a predetermined number at a scheduled
time.
Message Waiting Defines directory numbers for message-waiting on and
message-waiting off indicator. A directly connected
voice-messaging system uses the specified directory
number to set or to clear a message-waiting indication for a
particular Cisco Unified IP Phone.
Message waiting A light on the handset that indicates that a user has one or
indicator more new voice messages.
Music on hold Plays music while callers are on hold.
OL-21862-01
If you are using this feature, you must disable
Enbloc dialing.
No support for resuming a call from a shared line
party.
Cisco ATA 187 Analog Telephone Adaptor Administration Guide for SIP (Version 1.0)
Telephony Features Available for the ATA 187
Configuration Reference
For more information, refer to the Cisco
Unified Communications Manager
System Guide, Cisco Unified IP
For more information, refer to the Cisco
Unified Communications Manager
Features and Services Guide,
Matter Codes and Forced Authorization
Codes.
For more information, refer to the Cisco
Unified Communications Manager
Features and Services Guide,
Pickup.
For more information, refer to:
Requires no configuration, unless you
want to use music on hold. See
hold in this table for information.
For more information refer to Cisco
Unified Communications Manager
Administration Guide, Meet-Me
Number/Pattern Configuration.
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
Message Waiting Configuration.
Cisco Unified Communications
•
Manager System Guide,
Connectivity to Cisco Unified
Communications Manager.
For more information refer to:
Cisco Unified Communications
•
Manager Administration Guide,
Message Waiting Configuration.
Cisco Unified Communications
•
Manager System Guide,
Connectivity to Cisco Unified
Communications Manager.
For more information refer to Cisco
Unified Communications Manager
Features and Services Guide,
Hold.
Phones.
Client
Call
Music on
Voice Mail
Voice Mail
Music On
4-3