Cisco 8961 User Manual page 50

Navigation pad and
5
Select button
Conference button
6
7 Hold button
Transfer button
8
Key pad
9
10 Speakerphone button
11 Mute button
12 Headset button
13 Volume button
14 Messages button
40
The four-way Navigation pad allows you to scroll through menus,
highlight items, and move within a text input field.
The Select button (center of the Navigation pad) allows you to select a
highlighted item, disable the phone screen for cleaning, or enable the
phone screen if it is in power-save mode.
The Select button is lit (white) when the phone is in power-save mode.
Creates a conference call.
Places a connected call on hold.
Transfers a call.
Allows you to dial phone numbers, enter letters, and choose menu
items (by entering the item number).
Selects the speakerphone as the default audio path and initiates a new
call, picks up an incoming call, or ends a call. During a call, the button
is lit green.
The speakerphone audio path does not change until a new default
audio path is selected (for example, by picking up the handset).
If external speakers are connected, the Speakerphone button selects
them as the default audio path.
Toggles the microphone on or off during a call. When the microphone
is muted, the button is lit red.
Selects the wired or wireless headset as the default audio path and
initiates a new call, picks up an incoming call, or ends a call. During a
call, the button is lit green.
A headset icon in the phone screen header line indicates the
headset is the default audio path. This audio path does not change until
a new default audio path is selected (for example, by picking up the
handset).
Controls the handset, headset, and speakerphone volume (off-hook)
and the ringer volume (on-hook).
Silences the ringer on the phone if an incoming call is ringing.
Auto-dials your voicemail system (varies by system).
OL-19963-01