Assign Ip; Configure - Lantronix MSS100 Quick Start Manual

ASSIGN IP

1) Open EZWebCon on the CD-ROM.
2) Click Action ➔ Assign IP Address.
3) Select the MAC address of your SCS device and click Next.
4) Select Assign Specific IP and click Next.
5) Type your IP Address.
6) Confirm the Subnet Mask Address.
7) For Gateway, select None.
8) Click Next.
9) Click the Assign IP button.
10) Click the Done button.
Note: Your device name and IP address should be listed in the EZWebCon
window. If it is not, minimize and then restore the window.
8
Q u i c k S t a r t G u i d e
M S S 1 0 0 / M S S - V I A / M S S 4
EZWebCon Home Page
Note: The EZWebCon wizard
walks you through the
process of assigning an IP.
The Next button at the
bottom of each EZWebCon
screen advances you to the
next step in the process.

CONFIGURE

1) In the EZWebCon window, click the device name you wish
to configure.
2) Click Action ➔ Manage.
Note: Your Web browser opens, displaying the Server Configuration window.
SERVER CONFIGURATION
W W W . L A N T R O N I X . C O M
9