Installing In Mac Os - Korg microSTATION Setup Manual

If you are unable to proceed with the installation, it's
possible that your computer has been set to prohibit
installation of unsigned drivers. Check the settings
of your computer as described in "Allowing installa‐
tion of drivers that are not digitally signed."
4. After you've installed the KORG USB‐MIDI
driver, exit the installer.
If you are asked whether you want to restart, choose
[Yes] to restart your computer.
For more about installation, setup, or uninstallation
of the KORG USB‐MIDI driver, refer to the installa‐
tion manual (HTML).
To view the manual, choose [Start][All Pro‐
grams][KORG][KORG USB‐MIDI Driver
Tools][Installation Manual].
About the microSTATION and USB-MIDI driver
ports
KEYBOARD port
Applications on your computer use this port to receive
MIDI messages from the microSTATION (data from
the keyboard and controllers).
SOUND port
Applications on your computer use this port to send
MIDI messages to the microSTATION's internal sound
generator, making it produce sound.
Installing and setting up the microSTATION
Editor/Plug-In Editor
For details on installation, setup and using the
microSTATION Editor/Plug‐In Editor, please see the
"microSTATION Editor/Plug‐In Editor user's guide"
(PDF) .
Allowing installation of drivers that are not
digitally signed (Windows only)
If the computer you're using has been set to forbid the
installation of any drivers that are not digitally signed,
you won't be able to install the KORG USB‐MIDI
driver. Proceed as follows to change this setting so that
you'll be able to install the drivers.
1. From the taskbar, click [Start][Control Panel] to
access the control panel.
2. In the control panel window, double‐click
[System], and then click the [Hardware] tab.
3. In "Drivers," click [Driver Signing].
4. In the "What action do you want Windows to
take?" area , choose [Ignore] or [Warn], and then
click [OK].
If necessary, you can change this setting back to its
original state after you've installed the KORG USB‐
MIDI driver.
Installing in Mac OS X
Installing the software
You'll need to run the installer separately for each
software item such as the KORG USB‐MIDI driver and
the microSTATION Editor/Plug‐In Editor to install
them one at a time.
1. Insert the included accessory disc into the disc
drive of your computer.
2. On the accessory disc, double‐click the software
installer (.pkg) to start up the installer.
Each installer is located in the following folder.
• KORG USB‐MIDI driver
"KORG USB‐MIDI DRIVER" folder  KORG
USB‐MIDI DRIVER.pkg
• microSTATION Editor
"microSTATION Editor" folder 
microSTATION Editor.pkg
3. Follow the on‐screen instructions to install each
item of software such as the KORG USB‐MIDI
driver and microSTATION Editor.
Installing the software
5