Table of Contents
Advertisement
03.
How to Connect Cables
• Do not connect/disconnect cables while monitor or other external equipments are turned on.
• First turn off the power all the attached equipment and make connections.
• Make sure the power cord is inserted properly into the power inlet to prevent unexpected pullout of
the cord.
3.1. Connection of Single
ㆍMonitor and PC should be connected; a Com Port in a PC and RS-232C IN port in a monitor is
connected with supplied RS-232C cable.
ㆍ If you do not have Com Port, you need to use an USB converter for RS-232C. Depending on
manufacturers or models, converters may cause malfunction.
LOOP OUT
DVD player
DVD player
DVD player
LAN Cable (Direct cable)
Control P C
DP Cable
DP Cable
HDMI Cable
DVI Cable
RS-232C
LAN Cable(Cross Cable or Direct Cable)
LAN Cable (Direct cable)
H U B or Router
- 18 -
- 19 -
Advertisement
Table of Contents
