Table of Contents
Advertisement
Auto Upgrade - When it is set to "On", you can set the
network upgrade when the TV turns on and connects to the
network.
Network Upgrade - Check the process and it will prompt
you to upgrade the software.
NOTES
•
Software Update can also be performed via downloading
the latest software to a USB memory device.
•
Please be careful not to disconnect the power or remove
the USB drive until updates are complete. The TV will
be turned on automatically after completing the software
update. When software is updated, video and audio
settings you made will return to their default settings and
your personal settings will be deleted. We advise you
to write down your settings so that you can easily reset
them after the update.
Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV
to a network that supports DHCP. To set up your TV's cable
network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the
previous section.
2. On the Network screen, select Configuration and press
the [OK] button to enter the submenu.
3. Set Internet Connection to On and Interface to Ethernet.
4. Select IP Setting and press the [OK] button to enter it.
Network-Configuration-IP Setting
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
5. Set Address Type to Auto.
6. Auto acquires and enters the necessary connection
values automatically.
7. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IP addressing by DHCP.
Or, follow the steps listed to the follow to manually
configure the network connection.
Basic Features
Auto
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
Network Setup (Manual)
Use the Automatic Network Setup when connecting your TV
to a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen.
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The network
connection values are displayed.
How to set up manually
To set up your TV's network connection manually, follow
these steps:
1. Follow Steps 1 through 5 in the "How to set up
automatically" procedure.
2. Set Address Type to Manual.
Network-Configuration-IP Setting
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
3. Press the [▲/▼] buttons to select IP Address and press
the [◄/►] buttons to move the cursor to the entry field.
Then press 0~9 buttons to enter the numbers.
4. Press the [Menu] button to exit IP Address and press
the [▲/▼] buttons to select the next options to enter the
numbers.
5 When done, press the [Menu] button to return to the
previous menu.
6. Select Connection Test to check the internet connectivity.
19
Manual
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
0.
0.
0.
0
Hide quick links:
Advertisement
Table of Contents
