Hisense 65XT880 User Manual page 16

Adaptive Luminance: Automatically adjusts the detail
and brightness within the picture. You can select one of
the following options: Off, Low, Medium, and High.
MJC: An advance feature to improve the perception of
moving images. If Effect option is set to Off, the Demo
Partition and Demo options are not available. (Depends
on the availability model)
3D - Enables playing of 3D movies and TV shows by using
the compatible 3D glasses. Please refer to the 3D section
for more information. ( The 3D function is only applicable to
the products which support it )
NOTES
• When 3D video is watched under the fluorescent lamp
(50~60 Hz) or tri-band fluorescent tube, there may be
slight flicker, so please adjust the illumination downward
or switch off the light.
• Certain functions, such as Zoom, are not available when
watching 3D movies and TV shows.
• This TV supports automatic identification of common
3D formats when connected to HDMI V1.4 compatible
sources. Other 3D sources require manual setup.
• To prevent the interference with other TVs or wireless
devices, syncing shall be performed between the glass
and the TV, for this reason after following the above
procedure you require to press the Power key for 2
seconds to start pairing, when the indicator light flashes
twice, syncing is completed.
• Sit upright facing the TV when watching 3D movies and
TV shows.
Picture-3D
3D Mode
LR Swap
Convergence
Depth
3D To 2D
3D Mode: You can enter the 3D Mode and set the 3D
format.
Off: When viewing 2D video, this option must be
selected.
2D To 3D: The TV can convert ordinary 2D program to
3D program. When wearing 3D glasses, you can view
the 3D video effect.
Basic Features
2D To 3D
Left-Right
6
8
3D SWITCH.
Off
Side By Side: Select it according to video source
signal.
Top And Bottom: Select it according to video source
signal.
NOTES
• When 3D signal format is Frame Packing, the image
will be displayed according to the resolution of the
incoming signal. For example: when the input signal
is 1280×720, a 720p image will be displayed. A
1920×1080 input signal will be displayed in 1080p.
• When 3D signal format is Side-by-Side, Top-and-
Bottom, the image is displayed full screen in half
resolution (960× 1080 or 1920×540 respectively).
LR Swap: Make left/right eyes exchange on 3D video
source signals. (Not available when 3D Mode is Off and
2D To 3D)
Convergence: Adjust the visual hierarchy sense of
picture.(Only available when the 3D format video is
playing)
Depth: Adjust the perception of the depth of the image.
(Only available when 3D Mode is 2D To 3D)
3D To 2D: If the option is set up as On, the TV can display
all 3D format signals in 2D form.(Only available when the
3D format video playing)
Reset Picture Settings - Resets all picture settings to the
factory defaults.
15