Hisense 65XT880 User Manual page 12

Turning your TV on and off
To turn your TV on: Connect the TV to an AC power outlet
and an external antenna, then turn on the power via
switch located below the front right hand side of unit.
Turning off to standby mode: Press [
on the back RHS panel or on the remote control to switch
to standby mode. You can activate the unit again by
pressing [ Power Standby].
WARNING
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Selecting the Input Source
• Select the Input Source depending on the video device
you have connected to your TV.
• To select the Input Source:
Press the [Source] button. When the list of Input
Sources appears, press the [▲/▼] buttons to select
the source, then Press the [OK] button to connect.
Alternative
• Press the [HiSmart] button to enter the HiSmart hub,
then press the [▲/▼/◄/►] buttons to select the
options.
• Press the [HiMedia] button to switch to HiMedia mode
directly
• Press the [
] button to switch to the browser
interface directly if the network is connected.
Changing channels
Press the [CH Λ/CH V] buttons to go to the next higher
or lower channel. Or, Press the number buttons to select
a channel. For example, to select channel 12, press [1],
then press [2].
Alternative
• Press the [OK] button to display the channel lists
when there is no menu on the screen. Press the [Red/
Green] buttons to turn to the last / next page. Press
the [▲/▼] buttons to select a channel and then press
the [OK] button to view the selected channel. Press
the [Yellow] button to display the list type selection.
Press the [▲/▼] buttons to select the type and press
the [OK] button to confirm.
Using the Remote Control
.
Power Standby]
11
• Press the [FAV] button to view the Favorites. Press the
[◄/►] buttons to select the favourite list. Then press
the [Yellow] button to add the channel. If you want to
add another channel, press the [CH Λ/CH V] buttons
to switch to the channel and then press the [Yellow]
button to add it. Press the [Red/Green] buttons to page
up/down and press the [▲/▼] buttons to select the
channel on the list. If you want to erase a channel you
can press the [Yellow] button to erase it. If you want
to view a channel, press the [▲/▼] buttons to select
a channel and then press the [OK] button to view the
selected channel if you have previously preset your
favorite channels.
• Press the [Last] button to go to the last viewed
channel.
Displaying channel information
Press the [Info] button to display the current information.
Adjusting the volume
Press the [VOL Λ/VOL V] buttons to increase or decrease
the volume. Press the [Mute] button to turn the sound off.
Press the [Mute] button again to turn the sound back on.
Selecting the sound mode
Press the [Sound] button to select between 4 different
pre-adjusted sound modes: Standard, Music, Speech,
and User (configurable mode). The User mode preserves
your preferred sound settings after setting the audio
frequency band via the Equalizer which is located under
the Audio submenu.
Selecting the picture mode
Press the [Picture] button to select between 5 different
pre-adjusted picture modes: Standard, Soft, Bright,
Game and User (configurable mode). The User mode
automatically preserves your personal settings after
adjusting brightness, colour and contrast levels.
Selecting the aspect ratio
Press the [Zoom] button to change the screen aspect
ratio options (4:3, Auto, 16:9)
Freezing a picture
Press the [Still] button to freeze current viewing picture
and press again to return to the normal mode.