Honda 08E51-S84-100 Installation Instructions Manual page 7

22. Attach the two (3A) fuse labels to the security
system harness fuse case.
KEYLESS ENTRY
CONTROL UNIT
VEHICLE HARNESS
18-PIN CONNECTOR
23. Unplug the vehicle 18-pin connector from the
keyless entry control unit, and plug the security
system harness 18-pin connectors in between.
24. Unplug the light switch 16-pin connector, and plug
the security system harness 16-pin connectors in
between.
VEHICLE HARNESS
16-PIN CONNECTOR
DISARM
SWITCH
3-PIN
CONNECTOR
SECURITY SYSTEM
3-PIN CONNECTOR
25. Plug the disarm switch 3-pin connector into the
security system harness.
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
FUSE
CASE
FUSE
LABEL
(3A)
SECURITY
SYSTEM
18-PIN
CONNECTOR
3429060M
SECURITY
SYSTEM
16-PIN
CONNECTOR
AII 27627 (0408)
26. Secure the security system harness to the vehicle
harness with five wire ties in the areas shown.
SECURITY
SYSTEM
HARNESS
WIRE
TIE
27. Along the door opening, secure the security
system harness to the vehicle harness with three
wire ties.
WIRE TIE
WIRE
TIE
3429070M
SECURITY SYSTEM
HARNESS
3429080M
7 of 8