Apex Digital LD3288T User Manual page 18

Select antenna options and perform Channel A uto Scan to receive television channels that will be stored into the TV tuner memory.
To enter TV Mode:
Press the MENU button
Using the
Press the down arrow button to highlight CABLE or AIR
Select CABLE if you subscribe
to a pay television service
without the use of a set top box.
Connect cable wire to the televi-­
sion (see page 10).
Press the arrow button to
highlight CABLE.
arrow button
to select A UTO SCAN. Press
ENTER and the cursor will move
up and CABLE SYSTEM will be
displayed next.
arrow button to
select STD > IRC > HRC > A uto
(Auto is recommended).
arrow button
to select A uto Scan and press
ENTER.
NOTE Channel Auto Scan may
:
take several minutes to com-­
plete.
17
arrow buttons;; scroll to highlight TV mode
Cable Mode Air Mode
Select AIR when connected
to an indoor/outdoor
antenna to receive local TV
broadcasts. Connect an-­
tenna wire to the television.
Press the
button to highlight AIR.
Press the down arrow
button to select Auto Scan
then press the
button twice to start Chan-­
nel A uto Scan.
Channel Auto Scan may
take several minutes to
complete.
NOTE: For cable or satellite
users without an indoor/
outdoor TV antenna, there is
no need to perform Channel
Auto Scan. Connect your
cable or satellite set top box
to one of the available inputs
on the TV for viewing. See
pages 11-­13 for connection
details.
arrow
right arrow