Wall Mounting
It is recommended that you
call your local TV dealer
or a licensed contractor to
secure the television to the
wall using suitable VESA
400 x 200mm wall mount
hardware.
1
2
1. Master Power ON/OFF Switch - When the master power is
switched OFF, the power button located on the remote control and
right side of the television will not function. Make sure it is switched
ON for regular TV viewing on a daily basis.
2. AC Power Plug - Insert power cord during initial setup.
3. USB Port - For service technician use only.
4. HDMI Inputs (3) - Connects to digital A V devices that feature
and two-channel digital audio all from one cable. Recommended for
best performance.
5. PC IN - VGA/Audio Input (3.5mm) - Connect an optional
VGA cable from your personal computer and a 3.5mm audio cable
for sound.
9
Removal of TV Pedestal
For Wall Mounting
To remove the pedestal from the
the (6) Philips screws from
underneath the pedestal base and
slide the bracket off.
TV REAR PANEL
TV REAR PANEL
TV REAR PANEL
TV REAR PANEL
3
3
4
5
6
6. Component Inputs and L/R Audio Inputs (2) - Connect
up to two external devices that feature component (YPbPr) video and
audio output jacks.
7. SPDIF - Connect an optional coaxial digital cable through a com-
patible amp/receiver to enjoy superior audio sound.
8. S-Video - Connect to the S-Video output jack found on external
devices. For audio, connect a separate A UDIO L/R cable to the L/R
on A V1 adjacent to the S-Video input.
9. AV Inputs (2) - Connect up to two external devices to the
composite VIDEO (Y) and A UDIO (L/R) output jacks found on most
external video equipment.
10. RF Input - Connect antenna or cable for television reception.
7 8
9
10