Initial Setup Wizard
After connecting your TV antenna or cable wire, turn the television ON. The quick setup wiz-
ard will display on-screen. Select your preferred Picture setting followed by antenna options
if you will view local over-the-air TV broadcasts from an antenna. Theses channels will be
stored in the TV tuner memory after performing Channel A uto Scan.
In
, the television display meets Energy Star standards to reduce
power consumption.
In Retail Mode, the television provides a more dynamic picture that will increase
power consumption beyond Energy Star standards.
The wizard will direct you to the TV menu to select antenna options and perform
Channel A uto Scan. Channels found will be stored into the TV tuner memory.
How to Navigate:
Press the
arrow button to highlight CABLE or AIR based on your an-
tenna connection.
Press the arrow button to select Auto Scan and press ENTER (when
Cable is selected, 'AUTO' is recommended). Otherwise, press the
button to select STD > IRC > HRC > A uto
Highlight Start to Scan and press ENTER.
Channel Auto Scan may take several minutes to complete.
arrow
16
16