It is strongly recommended that the installation of a high quality roof top antenna, digital cable or satellite set top box be used
transmitter and strength of antenna used.
Roof Antenna / Cable Outlet Installation
Connect the RF coaxial (75 ohm) cable from your existing roof top an-
tenna or wall outlet. Finger tighten the F-Connector end to the TV input on
the rear panel.
See pages 16-17 for TV setup and Channel A uto Scan.
Tune to TV programming directly from the television tuner.
Digital Cable / Satellite Set Top Box
Connect the RF coaxial (75 ohm) cable from the video outlet of your cable /
Satellite box to the RF input on the TV's rear panel. Select Ch. 3 or 4 on the
TV and select a channel.
For greater performance, use component video or an HDMI installation.
(shown) Refer to your set top box user manual.
See pages 16-17 for TV setup and Channel A uto Scan.
TV REAR PANEL
F - Connector
Optional HDMI cable
TV REAR PANEL
F - Connector
Ant./Cable
Wall Outlet
Cable / Satellite set top box
10