Bluetooth® Manager Device Setup - Datalogic Memor User Manual

1 3
3.8.2 Bluetooth® Manager Device Setup
Windows CE Bluetooth® Manager Device Setup
Before turning on Bluetooth®, ensure that the two devices are within close
range and that both Bluetooth-enabled devices are discoverable.
1. Open the Bluetooth® control panel by tapping Start > Settings >
Connections tab > Bluetooth Manager.
2. Tap Settings. The Settings tab allows you to enable or disable the
Bluetooth radio and specify settings for Incoming Connections.
3. Select or clear the "Enable Bluetooth Radio" check box:
Tap Find Me if you want to make the Memor
for 60 seconds, allowing them to set up a connection.
NOTE
62
By default, Bluetooth® is turned off. If you turn it on, and
then turn off your device, Bluetooth® also turns off. When
you turn on your device again, Bluetooth® turns on
automatically.
DATALOGIC MEMOR™
TM
visible to other Bluetooth devices