Datalogic Memor User Manual page 88

1 3
NOTE
To create a Bluetooth® partnership between your device and another device
that has Bluetooth® capabilities, ensure that the two devices are turned on,
discoverable, and within close range.
2. Open the Bluetooth® control panel by tapping Start > Settings >
Connections tab > Bluetooth Manager.
1. Search for available Bluetooth® Devices by tapping the button for the type
of device you want (Printer, Serial or All) or tap Discovery to skip this step.
The Memor
NOTE
2. Once searching is complete, Bluetooth® Device Profiles will be displayed
in the Discovery tab. You can set up a connection to a device on the list, or
clear it from the list by tapping the Clear button:
68
By default, Bluetooth® is turned off. If you turn it on, and
then turn off your device, Bluetooth® also turns off. When
you turn on your device again, Bluetooth® turns on
automatically.
TM
will search for Bluetooth® Devices within range.
If you attempt to set up a connection when the Bluetooth®
Radio is disabled, you will receive a message reminding
you that the radio is turned off, and asking you if you want
to turn it on. Tap Yes if you need to enable the Bluetooth®
Radio.
DATALOGIC MEMOR™