Bluetooth® Manager Device Setup - Datalogic Jet User Manual

3
3.7.5 Bluetooth® Manager Device Setup
In order to enable a Bluetooth
must perform the discovery procedure and enable the device as follows:
1. Enable the Bluetooth
2. Place the Bluetooth
3. From the JET™Control Panel, select and run the Bluetooth
applet.
4. Run the Discovery procedure: "Scan Device". The following window will appear:
32
®
device for communication with the JET™ PDA you
®
module as described in par. 3.7.4.
®
device within the range of the JET™ PDA (10 meters).
JET™
®
Device Properties