Resetting The Memor - Datalogic Memor User Manual

1 3
3.4.1

Resetting the Memor™

Windows CE
There are several reset methods for the Memor™.
A warm boot terminates an unresponsive application and clears the working
RAM, but preserves both the file system and the registry.
A cold boot forces all applications to close and clears working RAM and files not
resident on the persistent flash memory. Registry is restored from persistent
memory if available or returned to factory default.
A Clean Boot restores the Memor™ to factory configuration: registry and file
system return to factory default.
WARM BOOT
A warm boot closes all applications, clears the working RAM, but preserves the
file system and registry. If an application "hangs" initiate a warm boot to
terminate the application.
To perform a warm boot, press these keys simultaneously:
COLD BOOT
A cold boot is a complete reset of the Memor™ in which all applications are
forcibly closed and RAM is completely cleared. Registry is restored from
persistent memory if a saved copy is available (see 3.7.2) and RAM file system
completely erased. You will lose any applications and data (registry too) which
are not stored in persistent flash memory.
A cold boot is necessary when the Windows CE operating system locks up and
the warm boot command does not work.
To perform a cold boot, press these keys simultaneously:
CLEAN BOOT
A clean boot is a cold boot that causes the device to be restored to factory
configuration. The Memor™ will reset to its factory configuration, clear the
working RAM and initialize the file system. You will lose any applications and
data stored in persistent flash memory. At the next startup the system will ask to
recalibrate the touch screen.
To perform a clean boot, follow these steps:
1. Perform a Cold Boot (see Cold Boot).
2. Quickly release all the keys when the screen goes black.
3. Within 1 second press and hold down the Esc and 0 keys until the left
orange led starts blinking.
4. Release the Esc and 0 keys.
34
DATALOGIC MEMOR™