Datalogic Memor User Manual page 61

USE AND FUNCTIONING
3
Data Capture Configuration Window
The screen format shows two columns where the left column indicates branches
or parameters. Branches have three dots in the right column (...). You can
navigate through the tree structure using the stylus or keyboard arrows directly
on the item field or from the menu.
Parameters have their corresponding current values in the right column. You
can edit parameter values using the stylus or keyboard arrows directly on the
item field or from the menu. To change a value for example, select the line of
the value to be changed, choose Edit from the Parameter Menu then choose a
new value from the values listed in the box (see following figures).
Selecting Data Capture Setup Parameters
Alternatively using the stylus, you can tap once directly on the value on the right
column; continue tapping until the desired value is reached.
To activate a new configuration select the File ->Save Menu to send the new
configuration to the barcode decoding software and save the new configuration.
This will save the configuration to non-volatile memory preventing loss at the
next system reset.
41