Set Up - Zenoah EB4300 Owner's Manual

EB4300

6. Set up

BLOWER TUBES
1. Connect the blower and swivel joint with the flexible
hose. Clamp both ends of the flexible hose securely
with the hardware attached to the unit.
2. Align the protrusion and the groove provided on the
tube ends and twist the tube until connection is locked
up.
HANDLE STAY
• Insert the handle stay in the swivel joint pipe and fas-
ten with the screw and nut.
THROTTLE LEVER
• Insert the throttle lever handle in the handle stay and
tighten the screw on the clamp attached to the handle.
(1) Throttle lever handle
(2) Tighten
(3) Stay
(4) Hose
(5) Swivel
(6) Clamp
GB-8
THROTTLE CABLEl
• Use the band to fasten the colgate tube containing
(1) Fasten with band
(2) Cable
(3) Throttle lever
(4) Hose
(1) Handle stay
(2) Swivel joint pipe
(3) Hose
(4) Nut
(5) Screw
the throttle cable and the power cable to the hose.