Set Up - Zenoah EBZ3000RH Owner's Manual

EBZ3000RH

6. Set up

BLOWER TUBES
1. Connect the blower and swivel joint with flexible hose.
Clamp both ends of the flexible hose securely with
the hardware supplied with the unit.
2. Align the protrusion and the groove provided on the
tube ends and twist the tube until connection is locked
up.
NOTE
A light lubricant may be used to ease assembly of
flexible pipe to blower elbow.
THROTTLE LEVER
• Set up the clamp to the swivel and tighten the screw
on the clamp.
THROTTLE CABLE
1. First, lightly tighten the hose in the middle of it by
putting the band through the hole (a).
2. Next, lightly tighten the cable by putting the band
through the hole (b).
GB-8
(1) Clamp
(2) Swivel
(3) Screw
(1) Hose
(2) Band
(3) Cable