Maintenance Assistant - Xerox Phaser 7100 System Administrator Manual

Administrator Tools
Enable Smart eSolutions
1. In CentreWare Internet Services, click General Setup > Smart eSolutions > Registration.
2. If the HTTP Proxy Server is not configured, click Enable Proxy Server. For details, see
on page 36.
3. Click Register with Xerox Communication Server.
4. On the Xerox Communication Server page, next to Server Communication, select Enabled.
Next to Transmission Time, type the time of the day when you want the printer to perform its
5.
daily communication with Xerox.
6. Click Apply.
To test the connection, click Test Communication Now.
7.
Note: If you have not registered the printer for Smart eSolutions, this button is disabled.
®
MeterAssistant
To view the last transmission of Billing Meter information for your printer:
In CentreWare Internet Services, click Status > Smart eSolutions > Meter Assistant.
1.
2. To configure meter email alerts, see
®
SuppliesAssistant
To view the current status of supplies:
1. In CentreWare Internet Services, click Properties > General Setup > Smart eSolutions >
SuppliesAssistant.
2. Printer supplies list with their current% Life Remaining.
3. If Supplies Assistant email alerts are required, see

Maintenance Assistant

In CentreWare Internet Services, click Status > Smart eSolutions > Maintenance Assistant.
1.
2. To send diagnostic information to Xerox, click Send Diagnostic Information to Xerox.
Note: If the button is unavailable, register the printer for Smart eSolutions.
To send diagnostic information to Xerox and start an online troubleshooting session, click Start an
3.
Online Troubleshooting Session at www.xerox.com.
Note: If the button is unavailable, register the printer for Smart eSolutions.
82 Phaser 7100 Color Printer
System Administrator Guide
Setting Up Billing Meter Read Alerts
®
Setting Up Supplies Data Alerts
Proxy Server
on page 76.
on page 76.