Sirius Satellite Radio Sportster 6 User Manual page 76

While you are in the playback mode, the radio continues to store the audio from the
channel. Obviously, you will be unable to "catch up" to the live broadcast during play-
back, as new audio is being stored at the same rate at which you are playing back the
stored audio. You can use the F -F button to skip ahead or exit the Instant
Ast orwArD
Replay mode, and begin listening to the live broadcast again.
When paused, and the Instant Replay memory is 10 seconds from becoming full, you
will hear two beeps (if the Power-Up Tone option is enabled). When the memory is full,
the Sportster 6 will automatically begin playback, and will continue to store the channel
audio, overwriting the oldest portion of the audio previously stored.
The Instant Replay Time Position indicates the exact amount of time the Play Position
Indicator (see Figure 61, on page 74) is behind the live broadcast, expressed as
Hours:Minutes:Seconds, and displayed as a negative number. For example, if –00:02:40
is displayed, this would indicate that the Play Position Indicator is 2 minutes and 40
seconds behind the live broadcast.
When you put Instant Replay into the Fast-Forward, Rewind or Pause Modes, icons ap-
pear on the screen to indicate the active mode (see Figure 62).
Instant Replay
Instant Replay Instant Replay
Pause Mode
Fast-Forward Mode Rewind Mode
figure 62
[ ]
76
Operation