Sirius Satellite Radio Sportster 6 User Manual page 42

4. Power on your Sportster 6 by pressing the p
ton. (See Figure 22.)
5. Be sure the vehicle is outside and the antenna has a
clear view of the sky. Verify that you are receiving the
SIRIUS signal. There should at least be one bar on the
lower left corner of the main display screen that de-
notes antenna signal strength. You can also press and
hold M and then rotate the r
enu
highlight s
ignAl
Satellite and Terrestrial bars show the strength of the
signal being received. (See Figure 23.) If the
signal reception is good, press and hold M
to return to the main display screen.
6. Ensure that the Sportster 6 is tuned to chan-
nel 184. Upon power up, the Sportster 6
should tune to channel 184 by default, when
it's not yet activated. If it's not on channel
184, refer to "Operation" on page 55 to learn
about how to tune a channel.
7. If you haven't done so, turn on your vehicle's stereo system. Set it to play input
from the cassette source.
8. You should hear SIRIUS channel 184 through your vehicle's stereo system. You
are now ready to subscribe your Sportster 6.
9. The audio level output of the Sportster 6 can be increased or decreased as nec-
essary to match the audio levels of other sources in your vehicle. Refer to "Audio
Level" on page 87.
If the signal reception is good, but there is no audio when tuned to channel 184, be
sure the vehicle's stereo system is set to the correct source, i.e., cassette source (step
7). Also be sure that the audio level is set high enough to be heard (step 9). Refer to
"Troubleshooting" on page 102 for additional help.
[
42
Installation
otAry
i . Press the s
nDicAtor
]
but-
ower
knob to scroll and
button. The
elect
enu
figure 22
figure 23