Sirius Satellite Radio Sportster 6 User Manual page 39

option 1: aux In Cable Installation Instructions
1. Plug one end of the Aux In Cable into the green aUdIo connector on the dock.
(See Figure 16.)
2. Plug the other end into the auxiliary input jack connection of your vehicle's stereo
system.
3. Insert your Sportster 6 into the dock, aligning the radio against the rear of the dock
so that the rails on the dock fit into the mounting slots in the back of the radio. (See
Figure 17.)
4. Power on your Sportster 6 by pressing the p
5. Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify
that you are receiving the SIRIUS signal. There should at least be one bar on the
figure 16
figure 17
button. (See Figure 18.)
ower
AUDIO
ANT
[ ]
Installation
39