Table of Contents
Advertisement
http://sirius ca/en/install/frequency aspx. Go to the website and enter
your zip code. The Channel Finder will suggest a list of available FM channels
in your area. For convenience, write down or print out the list.
OR
b. Manually tune through your local FM channels on your vehicle's FM radio. Lo-
cate and create a list of channels that aren't being used by any FM radio
station. Write down the list. Once you have created your list of available FM
channels, you will need to find the one that provides the best match for your
Sportster 6.
TIP! You'll need to use the 'Manual' tune function on your vehicle's FM radio to
tune through every FM channel one-by-one. Turn on your vehicle's FM radio. Start
at 88.1 and use the 'Manual' tune function on your vehicle's FM radio to tune
through each FM channel one-by-one (88.1 followed by 88.3 etc.) to locate chan-
nels that aren't being used by a local FM radio station. Write down each FM chan-
nel that has only static or silence on it, until you reach 107.9.
5 Ensure that the Sportster 6 is tuned to channel 184. Upon power up, the Sportster
6 should tune to channel 184 by default, when it's not yet activated. If it's not on
channel 184, refer to "Operation" on page 55 to learn about how to tune a channel.
6 Pick the first FM channel on your list from step 4. Turn on your vehicle's FM radio
(if you have not already done so) and tune it to this FM channel.
90. 1
7 Set your Sportster 6 to transmit on the same FM channel that you have selected in
step 4:
I.
Press and hold M
[
]
44
Controls
MATCH FM CHANNELS
figure 27
until M
o
enu
enu
ptions
is displayed. (See Figure 28.)
Advertisement
Table of Contents
