Sirius Satellite Radio Sportster 6 User Manual page 40

lower left corner of the main display screen that de-
notes antenna signal strength. You can also press and
hold M and then rotate the r
enu
and highlight s
The Satellite and Terrestrial bars show the strength of
the signal being received. (See Figure 19.) If the signal
reception is good, press and hold M
main display screen.
6. Ensure that the Sportster 6 is tuned to channel 184.
Upon power up, the Sportster 6 should tune to channel
184 by default, when it's not yet activated. If
it's not on channel 184, refer to "Operation"
on page 55 to learn about how to tune a chan-
nel.
7. Turn on your vehicle's stereo system. Set it to
play input from the auxiliary input source.
8. You should hear SIRIUS channel 184 through
your vehicle's stereo system. You are now
ready to subscribe your Sportster 6.
9. The audio level output of the Sportster 6 can be increased or decreased as nec-
essary to match the audio levels of other sources in your vehicle. Refer to "Audio
Level" on page 87.
If the signal reception is good, but there is no audio when tuned to channel 184, be sure
the vehicle's stereo system is set to the correct source, i.e., auxiliary input source (step
7). Also be sure that the audio level is set high enough to be heard (step 9). Refer to
"Troubleshooting" on page 102 for additional help.
[
40
Installation
i . Press the s
ignAl nDicAtor
]
knob to scroll
otAry
button.
elect
to return to the
enu
figure 18
figure 19