Grizzly G0644 Owner's Manual page 33

Conveyor Belt
Tensioning
To tension the conveyor belt:
1.
Figure 33
Figure 33.
2.
3.
Note: Make sure the distance of the refer-
ence measurement taken in Step 1 is the
same on both sides.
Note: Do not overtighten the conveyor belt.
Your goal is reach an approximate
ing gap on the underside of the conveyor belt
(see Figure 34) and that the belt no longer
slips on the rollers.
Figure 34.
4.
OFF
1 ⁄ " hang-
2