11.18 Microphone AGC
Open the Microphone Auto Volume
Control Settings Screen
Configure microphone volume
auto control
11.19 Beam
Allow Reception of
Bluetooth Incoming Data
CH11.indd
261
Use the microphone automatic volume control
to normalize the recording quality and volume.
When recording, increase the volume if the
sound is too low, and vise versa
• Select
>
Settings
tion screen
• Select
System
tab
• At the "System" tab, select
AGC
• Select
Enable
or
disable
tion
• Select
finish configuration
If you wish to use Bluetooth to receive data
exchange from other devices (for example:
name card, file, or appointments etc.), please
check
Receive all incoming data exchange
option.
• Select
>
Settings
tion screen
• Select
Connections
• At the "Connections" tab, select
• Check
Receive all incoming beams
• Select
finish configuration
, to enter the configura-
the Microphone
to control this func-
, to enter the configura-
tab
Beam
▲Microphone AGC set-
tings screen
▲Configure Beam
2006/11/4
11
261
上午 12:18: