Table of Contents
Advertisement
11.18 Microphone AGC
Use the microphone automatic volume control
to normalize the recording quality and volume.
When recording, increase the volume if the
sound is too low, and vise versa
Open the Microphone Auto
11
Volume Control Settings Screen
• Select
• Select
• At the "System" tab, select
Configure microphone
volume auto control
• Select
• Select
11.19 Beam
If you wish to use Bluetooth to receive data
exchange from other devices (for example:
name card, file, or appointments etc.), please
check
option.
Allow Reception of
Bluetooth Incoming Data
• Select
• Select
• At the "Connections" tab, select
• Check
• Select
306
CH11_ENG1025.indd 306
>
Settings
, to enter the
configuration screen
System
tab
AGC
Enable
or
disable
function
finish configuration
Receive all incoming data exchange
>
Settings
, to enter the
configuration screen
Connections
tab
Receive all incoming beams
finish configuration
the Microphone
to control this
Beam
▲Microphone AGC set-
tings screen
▲Configure Beam
2006/11/10 ¤W¤È 11:48:27
Advertisement
Chapters
Table of Contents
