Keyboard Port Operation; Activate The Osd; Activate The Osd In Hardware Cursor Mode - ATEN CM1164 User Manual

4-port usb dvi-d kvmp control center

Hide thumbs Also See for CM1164:

Table of Contents

The CM1164 provides an extensive, easy-to-use hotkey function that makes it

convenient to control and configure your KVM installation from the keyboard.

To activate the OSD using your keyboard, tap the Scroll Lock key twice:

[Scroll Lock] [Scroll Lock]

You can close the OSD by pressing the Esc key or the space bar.

Note: The hotkey for activating the OSD can be change to the Ctrl key.

See Hardware Cursor Type, page 41 for details.

The following additional hotkeys apply when the Hardware Cursor Mode is

enabled. See Hardware Cursor Mode, page 24 and page 40, for more

information on this feature.

1. [Scroll Lock] [Scroll Lock] then mouse right-click to open the OSD.

2. Click Esc to close the OSD.

3. Click Esc again to exit Hardware Cursor Mode and go back to normal PC

operation.

Note: When Hardware Cursor Mode is disabled, pressing [Scroll Lock] twice

opens the OSD.

Keyboard Port Operation

Chapter 4

Table of Contents