Table of Contents
Advertisement
09 Maintenance and service
Car care
09
2. A light sanding with very fine abrasive
material can be performed locally before
painting if necessary (e.g. if there are
rough edges). Clean the surface thor-
oughly and allow to dry.
3. Stir the primer well and apply using a fine
brush, matchstick or similar. Finish with
base coat and clear coat once the primer
has dried.
4. For scratches, proceed as above, but
mask around the damaged area to pro-
tect the undamaged paintwork.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of
paint remains in place, fill in with base coat
and clear coat as soon as the surface has
been cleaned.
388
Advertisement
Table of Contents
