Programming individual buttons
To reprogram an individual HomeLink
ton, proceed as follows:
1. Depress the required button and do not
release.
2. When the indicator lamp on HomeLink
starts to flash, after approx. 20 seconds,
start with step 1 in section "Programming
HomeLink®" on page 145.
For more information or to leave comments
®
about HomeLink
, visit: www.homelink.com
or ring 00 8000 466 354 65 (or premium rate
phone number +49 6838 907 277).
®
but-
®
03 Your driving environment
*
Option/accessory, for more information, see Introduction.
®
HomeLink
*
03
147