Table of Contents
Advertisement
Limitations
The LDW function's camera sensor has limi-
tations similar to the human eye. For more
information, see page 184.
NOTE
There are several situations when LDW
does not give any warning, for example:
•
A direction indicator is switched on
•
The driver's foot is on the brake pedal
•
In the event of rapid accelerator pedal
depression
1
•
In the event of rapid steering wheel
1
movements
•
In the event of turning so suddenly that
the car rolls.
Message
Symbol
A
Lane departure warning ON
Lane departure warning OFF
Lane Depart. Warning
Unavailable at this speed
When "Increased sensitivity" is selected a warning is still given, see page 193.
1
Personal preferences
Settings are made from the centre console's
screen via the menu system in MY CAR.
From there, search and locate
Car settings
Driver support systems
Lane Departure
Warning. For information on
how the menu system is used - see
page 211.
1
Select from the options:
•
On at start-up
- The function enters
standby mode every time the engine is
started. Otherwise the same value as
Specification
/
The function is switched on/off.
Shown at switch-on/off.
The text disappears after 5 seconds.
The function is set in standby mode due to speed being lower than 65 km/h.
04 Driver support
Driver Alert System - LDW*
when the engine was switched off is
obtained.
•
Increased sensitivity
increases, an alarm is triggered earlier
and fewer limitations apply.
Settings
Symbols and messages in the display
In situations where there is no LDW function a
symbol may be shown in the combined
instrument panel in combination with an
explanatory message - follow the recommen-
dation given if appropriate.
Examples of messages:
*
Option/accessory, for more information, see Introduction.
- The sensitivity
04
193
Advertisement
Table of Contents
