Table of Contents
Advertisement
04 Driver support
BLIS*
•
Select On or Off at
Settings
settings
BLIS.
When BLIS is deactivated/activated the lamp
in the button extinguishes/illuminates and the
combined instrument panel confirms the
change with a text message. The door panel
indicator lamps flash once upon activation.
To extinguish the message:
•
Press the left-hand stalk switch's OK but-
ton.
04
or
•
Wait approx. 5 seconds - the message
extinguishes.
For information on the menu system - see page 211.
2
*
202
Option/accessory, for more information, see Introduction.
When BLIS operates
Car
Principle for BLIS: 1. Zone in blind spot. 2. Zone
for rapidly approaching vehicle.
The BLIS function is active at speeds above
approx. 10 km/h.
The system is designed to react when:
•
the driver's vehicle is overtaken by other
vehicles
•
the driver's vehicle is rapidly caught up
by another vehicle.
When BLIS detects a vehicle in zone 1 or a
rapidly approaching vehicle in zone 2, the
door panel's BLIS lamp illuminates with a
constant glow. If the driver activates the
direction indicator on the same side as the
warning in this situation then the BLIS lamp
will change from a constant glow to flashing
with a more intense light.
WARNING
BLIS does not work in sharp bends.
BLIS does not work when the car is being
reversed.
Activate/deactivate CTA
In cars equipped with parking assistance (see
page 195), the CTA function can be deacti-
vated/activated with the parking assistance
On/Off button.
On/Off for parking assistance and CTA sensors.
CTA can be deactivated individually in the
menu system MY CAR
2
as follows:
Advertisement
Table of Contents
