Table of Contents
Advertisement
1. Turn TUNE to the channel you want to
move in the list and confirm with OK/
MENU.
> The selected channel is highlighted.
2. Turn TUNE to the new location in the list
and confirm with OK/MENU.
> The channels change places with each
other.
After the preset channels (max. 30) come all
the other channels available in the area. It is
possible to move a channel up to a place in
the preset list.
Save the available TV channels as
presets
If the car has been moved within the country,
for example, from one city to another, it is not
certain that the presets are available at the
new location as the frequency range may
have changed. In which case, carry out
another scan and save a new preset list.
1. Press TV mode on OK/MENU.
TV menu
2. Turn TUNE to
and press OK/
MENU.
Autostore
3. Turn TUNE to
and press OK/
MENU.
> An automatic scan for available TV
channels starts, this scan takes a little
while. During this time the figure for
each channel found and added as a
preset is shown. When the scan is
complete a message is shown and the
picture is shown. A preset list (max. 30
presets) has now been created and is
available. To change channel, see
page 294.
Scanning the TV channels
This function automatically scans through the
frequency range for all channels available in
the area where you are. When a channel is
found, it is shown for approx. 10 seconds
before scanning is resumed. Scanning is
stopped with EXIT, then the channel that you
just watched continues to be shown. Scan-
ning does not affect the preset list.
Activate scanning in TV mode under
menu
Scan.
Teletext
It is possible to read Teletext. Follow these
steps:
1. Press the
button on the remote
control.
2. Enter the page number (3 digits) with the
number keys (0-9) to select page.
> The page is shown automatically.
06 Infotainment system
Enter new page number, or press the remote
control buttons
page.
Return to TV screen with EXIT or by pressing
the
button on the remote control.
It is also possible to control the teletext with
the coloured buttons on the remote control.
Information about the current
programme
Press the INFO button in order to display the
information about the current programme, the
next programme and its start time. If the
INFO button is pressed once more then addi-
tional information on the current programme
can sometimes be displayed, such as start
TV
and end times and a brief description of the
current programme. For more information on
the INFO button, see page 253.
To return to the TV picture, wait several sec-
onds or press EXIT.
*
Option/accessory, for more information, see Introduction.
TV*
/
to go to the next
}}
295
06
Advertisement
Table of Contents
