Table of Contents
Advertisement
Change unit
To change unit (km/miles) for distance and
speed - go to
MY CAR
Settings
System options
Distance and fuel
see page 211.
NOTE
In addition to the trip computer, these
units are also changed at the same time in
Volvo's GPS navigator RTI.
Trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
The figure is schematic - layout may vary depending on updated software and market.
3
Function
units,
3
Trip statistics
.
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
Using the TUNE control, the scale for the
bars can be changed between 1 km and
10 km - the cursor on the far right changes
position between up and down in relation to
the scale selected.
Operation
A setting can be made in the MY CAR menu
system:
MY CAR
My V60
05 Comfort and driving pleasure
•
Start new trip
ous statistics, go back out from the menu
with EXIT.
•
Reset for every driving cycle
the box with ENTER and go back out
from the menu with EXIT.
With the "
option ticked all statistics are deleted auto-
matically after driving is finished and the car
has been stationary for 4 hours. Trip statistics
start from zero the next time the engine is
started.
If a new driving cycle is started before
4 hours have elapsed then the current period
must first be deleted manually using the
"
Start new trip
See also information on Eco guide on page
73.
Trip
statistics:
*
Option/accessory, for more information, see Introduction.
Trip computer
- ENTER deletes all previ-
- tick in
Reset for every driving cycle
"
" option.
05
243
Advertisement
Table of Contents
