Rac Switch Tips - Graco 288046 Instructions - Parts Manual

RAC Switch Tips

FFT Fine Finish RAC Spray Tips
Order desired tip (Part No. FFTxxx) where xxx is
the size code for the chart.
* Fluid Output, fl oz/min (lpm)
Orifice Size in.
(mm)
0.008 (0.203) 8.8 (0.26)
0.010 (0.254) 13.9 (0.41)
0.012 (0.305) 19.9 (0.59)
0.014 (0.356) 27.0 (0.80)
WRX Wide RAC Spray Tips
Order desired tip (Part No. WRXxxx) where xxx is
the size code for the chart.
* Fluid Output,
fl oz/min (lpm)
Orifice Size in.
(mm) (14.0 MPa, 140 bar)
0.021 (0.533) 60.5 (1.79)
0.023 (0.584) 72.7 (2.15)
0.025 (0.635) 85.9 (2.54)
0.027 (0.686) 100.0 (2.96)
0.029 (0.737) 115.6 (3.42)
0.031 (0.787) 131.8 (3.90)
0.033 (0.838) 149.4 (4.42)
0.035 (0.889) 168.3 (4.98)
0.037 (0.940) 187.9 (5.56)
0.039 (0.991) 208.9 (6.18)
* Tips are tested in water.
❖ Measured with NO airflow. Air assist will tend to reduce pattern lengths by 1 in. to 2 in.
311052E
at 2000 psi
(14.0 MPa, 140 bar)
❖ Maximum
Pattern Width at
12 in. (305 mm)
at 2000 psi
1221
1223
1225
1227
1229
1231
1233
1235
1237
1239
❖ Maximum Pattern Width at 12 in. (305 mm)
4 to 6 6 to 8 8 to 10
(150) (200) (250)
208 308
210 310 410
212 312 412
214 314 414
24 in.
(610)
LTX Series RAC Tip Selection Charts
10 to 12 12 to 14
(300) (350)
510
512 612
514 614
33