During processing:
Do not use this appliance on an
•
unstable or uneven surface.
Keep the appliance and its
•
power cord out of the reach of
children.
Never let the appliance run
•
unattended.
Do not touch the steam or the
•
metal parts of the appliance, to
avoid burns or scalding.
Do not disconnect the power
•
cord or remove the head unit
before processing is complete.
If you have to stop processing,
•
disconnect the power cord
before you perform other
operations.
If there is a power outage
•
during processing and this
lasts up to three minutes, do
not immediately restart the
soymilk maker. Empty the
contents in the soymilk maker,
and then put in new contents
before restarting. Otherwise,
the contents will stick to the
chamber or overÁ ow, or the
appliance will set off a long
alarm.
After processing:
Disconnect the power before
•
you continue other operations.
Disconnect the power and
•
remove the power cord before
cleaning or disassembling this
appliance.
To prevent steam scalding,
•
keep a certain distance from
the soymilk maker before you
lift the head unit.
Install, remove, and clean the
•
perforated Á ow cup with care.
The blade on the head unit
is sharp. Be careful not to cut
yourself or others.
To prevent a short circuit or an
•
electric shock,
do not use water to rinse
•
the outside of the chamber
unit or head unit (including
the head unit handle,
control panel, upper plug,
upper plug connector, and
the power cord connector)
and keep them away from
drip or splash;
do not place the head unit
•
in water; and
do not place the base of the
•
soymilk maker in water.
Use a microwave to heat up
•
cold soymilk. Do not use this
appliance to heat it, as the
contents will stick to the inner
side of the chamber.
EN
5